|
Picture 1. View of the machine with automatic safety door
Picture 3. Jim Widmer and Sven Widmer, machine at the end customer
Picure 5. Wiap DM3S transport to the customer
Picture 7. HLV 40 material feed for 50 blanks.
Picture 9. WIAP DM3S with CNC control Sinumerik. Parameterized program system. A new workpiece is redirected and programmed in 5 minutes. System WIAP.
Picture 11. Now the base frame WIAP HLV is ready, painted for final assembly. Everything is covered with plastic
Picture 13. The rebar up to 4 meters have space on the frame
Picture 15. Here side view, the machine base bed with the automation in the assembly
Picture 17. There are a few hours of welding
Picture 19. In order to be able to keep the precision, both headstocks are relaxed in the multi-directional method MEMV
Picture 21. X slide the gliding surface is glued and secured with brass screws
Picture 23. Sliding surface scraping the Z carriage
Picture 25. Lining bracket for WIAP DM3S
Picture 27. Carriage assembly
Picture 29. Purchased material
|
|
Picture 2. Peeled and rolled precast tray for 2 x 50 pieces, ready to tie the bundle only
Picture 4. Machines view from behind
Picture 6. WIAP DM3S HLV double gripper self-centering, always concentric
Picture 8. WIAP DM3S, HLV 40 Automation. The blank is transported from the clipboard to the holder, all fully automatic, without manual intervention. One concept, many machines from WIAP
Picture 10. The CNC control is ready for mounting
Picture 12. The frame in front of the painting
Picture 14. Still a lot to weld
Picture 16. Here top view, the machine base bed with the automation in the assembly
Picture 18. Now the raw and finished bunker is still manufactured in the Dulliken factory. In addition to construction also all welding work of WIAP
Picture 20. It takes 2 simultaneous headstocks for this WIAP DM3S machine
Picture 22. The lubrication holes are drilled on the X slide. Some more than 140 mm long, that everything can be fed centrally
Picture 24. X carriage is reworked
Picture 26. Ball screw mounting
Picture 28. Hardened guides are attached to the machine bed WIAP DM3S
|
|
|
|
|
|
|