G Shift
|
For metal
relaxing with vibration WIAP MEMV® is the most important part of the
process of measuring components during the manufacturing and machining
process. Measuring tensions using the borehole method is only punctual.
The test method WIAP MEMV type A, the G-shift thus saves a lot of time.
This method makes it possible to detect at the entire component at
different, arbitrary points where stresses are and where not. If the G
moves, measured at the same measuring point, there are tensions in the
component. If the Gs remain at the measuring point before the process,
as stable after the process, there are no stresses in the workpieces.
During vibration, there is tension in the part: the explanation is that
the atoms are looking for and moving the most convenient way in the case
of stress. In a stress-free component, the atoms do not have to move
because they are already in the right place. This means that there is no
longer a distorted grid. If these are displaced, there is tension in the
component.
There are few methods of measuring to measure voltages that are non-destructive at various locations on a component and are also affordable. Only the WIAP MEMV method with the G displacement can do this. This measuring method was applied for a patent in early 2017 by WIAP AG.
|