|
|
 |
WIAP
DM4C-XG
Tool turret 4-fold, 8-fold, 12-fold
driven tools
C axis
Y axis
Tool changer
A power clamping device comprising forage,
Hydraulic unit and clamping cylinder
Single or double slide solution
Lining, faceplate, special clamping device,
Bezel (fixed or co-rotating)
|
Technical specifications: |
DM2 |
DM3 |
DM4 |
DM5 |
DM6 |
Guide width mm |
50 |
70 |
90 |
120 |
200/250 |
Guide high mm |
30 |
40 |
50 |
80 |
120 |
Max. Bed length mm |
4'000 |
7'000 |
11'000 |
14'000 |
open |
Max. Tip width mm |
2'500 |
5'000 |
8'000 |
11'000 |
open |
Max. Swinging-ø mm |
600 |
800 |
2000 |
2'500 |
open |
Max. Swinging diameter mm |
90 |
160 |
485 |
580 |
open |
Drive power up to kW |
20 |
30 |
75 |
150 |
250* |
Workpiece weight or tips T |
3 |
10 |
20 |
40 |
170* |
Required supports Stk. |
1 |
1 |
2 |
2 |
2 |
Flying reach 500 mm kg |
400 |
1'000 |
4'100 |
20'000 |
40'000 |
Flying reach 1000 mm kg |
Not applicable |
550 |
2'400 |
11'100 |
23'500 |
|
* Heavy duty construction |
|

Photo: Machine at Rollstar Schweiz Nr. 3 of the type
swing diameter 1600 mm top range 2 meters built in Switzerland.

Photo: Machining with rollstar, machine turns 6 er
tolerances, roughing and true rotation, workpiece temperature of 10 degrees
Difference can give a reject, if one does not pay attention also with the large
diameter.

Photo: Caroline Widmer at the fodder assembly after a repair

Photo: Assembly of the machine No. 4. Coarse Wiap Type: DM4C
Switzerland Swinging diameter 2000 mm x 3000 mm Tip width C Turning machine
built in Switzerland.

Example of double X carriage. Single X carriage
narrow.
Example: 2 machines in use for 20 years. Under hard turning conditions, the wear
of the guide is less than 0.015 mm. Often used in 24 hours shift operation.
Production 7 days a week, 365 days. Also thanks to the air support of the
carriages and flat guides, which does not interfere with the load of the gripper
during the large transverse forces during thread cutting. Last surveys: May
2014. 80% special steels with high strength are.
|