Aim of the MEMV
2016 Testes:
Burnt out plates and welded, we have never achieved the same results as
in annealing. An intensive test in autumn 2016, where measurements were
taken with all methods, we vibrated the experiment 1 2-D and vibrated
3-D, then a annealed plate and an unannealed plate. The annealed plate
has dropped 0.03 mm, the MEMV relaxed plate with 2D and 3D, 0.6 mm. Then
we made the next try 2D, 3D and 4D as we did with you, then the plate
was annealed and unglown, no difference.
So far, plates have always been the workpieces where we never had enough
success. With the test, we have also clarified the last problem.
1. Determine the difference between the various axes.
2. G value at various points what does the dead center and how can it be
moved. How far does the setting of the eccentric on the G values play
a role.
3. Which heart areas achieve what?
4. What does the 2D, 3D and 4D arrangement do?
5. Evaluation with logging for transfer to high school projects
Burnt out, flame dishes plates MEMV, vibration relaxing

Flame-lined and
burnt-out plate
relax 90 degrees in the axial direction
WM_870_10
|
|
.JPG)
Burnt out rings

MEMV Plates
|